Cavity anchor W-HR set
Cavity anchor W-HR with pan head screw
DWL-(W-HR)-ST/PLA-W.SCR-D13XL63MM-1/4IN
Art.-no.
0903063014
EAN 4066443032479
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Universal cavity anchor in set with matching metric raised countersunk head screw. Can be applied without a setting tool
- With matching pan head screw
- Good holding power due to large load application surface
- Universal clamping range
- Simple and easy installation without setting tool
- Immediate load-bearing capacity — no waiting
- All metric screw head shapes possible
- Screw can be released
Notice
Useful information:
Loads must be introduced into lightweight partition walls in accordance with DIN 18183-1:2009-05 relating to partitions and facings with gypsum boards on metal framing.
Application area
Pipe suspensions
Wall-mounted cabinets
Air-conditioning units for indoors
Pipe suspensions
Wall-mounted cabinets
Air-conditioning units for indoors
Create the drill hole
Thread anchor rail through the drill hole
1. Fix anchors using pull tie
2. Push the plastic ring forwards to the anchor base
Open pull tie and tear it off
Secure component
Product information
Datasheets(X)
Application area
- Can be used for cavity attachments with M5/M6/M8 metric screws in gypsum plasterboard, boards, hard particle boards and hollow block floors with a max. panel thickness of 51 mm
- Material thickness da = screw length l - attachment tfix - 11 mm
- For mounting attachments such as lightweight consoles, lamps, rails, switches, racks, information signs, etc.
null | null |
| Performance data | |||||
| Anchor diameter [mm] | M5 | M6 | M8 | ||
| Tensile load | Plasterboard 12.5 mm | Nrec. [kN] | 0,2 | 0,2 | 0,2 |
| Plasterboard 2 x 12.5 mm | 0,4 | 0,4 | 0,4 | ||
| Gypsum fibre board 10 mm | 0,3 | 0,3 | 0,3 | ||
| Hollow block Hbn, panel thickness 35 mm | 0,6 | 0,6 | 0,6 | ||
| transverse load | Plasterboard 12.5 mm | Vrec. [kN] | 0,4 | 0,4 | 0,4 |
| Plasterboard 2 x 12.5 mm | 0,7 | 0,7 | 0,7 | ||
| Gypsum fibre board 10 mm | 0,5 | 0,5 | 0,5 | ||
| Hollow block Hbn, panel thickness 35 mm | 0,9 | 0,9 | 0,9 | ||
| Characteristic values | ||
| Max. panel thickness/plate thickness | da [mm] | 51 |
| Min. panel thickness/plate thickness | da [mm] | 10 |
| Minimum screw length | [mm] | Attachment part tfix mm + panel thickness da mm +11 mm |
| Min. cavity depth | l [mm] | 51 |